C9130AXE-S
Cisco Catalyst 9130 Series Access Point C9130AXE-S Wifi 6 802.11ax, 8x8 MU-MIMO Challenging indoor environments, with external antennas.C9130AXE-S Cisco Catalyst 9130 Series Access Point WiFi 6, indoor, external antennas
Cisco Catalyst C9130AXE-S Wifi 6 802.11ax, 8x8 MU-MIMO, indoor, external antennas.
| Cisco Part Number |
: C9130AXE-S
|
| List Price |
: $Liên hệ ngay nhận giá tốt
|
| Giá bán |
: Giá rẻ nhất thị trường
|
| Bảo hành |
: 12 tháng
|
| Made In |
: Liên hệ
|
| Stock |
: Sẵn hàng
|
Điểm truy cập Cisco 9130AXE-S Series cung cấp trải nghiệm liền mạch ở mọi nơi cho mọi người, với hiệu suất chưa từng có trong triển khai mạng đa dạng. Vượt xa tiêu chuẩn Wi-Fi 6 (802.11 ax), Series 9130 cung cấp bảo mật tích hợp, khả năng phục hồi và tính linh hoạt trong vận hành cũng như tăng độ thông minh mạng.
Cisco Catalyst 9130AXE-S access point, được kết hợp với Cisco Digital Network Architecture (Cisco DNA), là các sản phẩm cấp doanh nghiệp sẽ đáp ứng cả nhu cầu hiện tại và tương lai của bạn với tiêu chuẩn 802.11ax trên cả 2 băng tần 2.4Ghz và 5ghz, sử dụng các công nghệ OFDMA và MU-MIMO, hỗ trợ tới 4 Wifi radios bao gồm: single 8x8 hoặc dual 4x4 radio 5Hhz , 4x4 radio 2.4 và Cisco RF ASIC.
| Software | ● Cisco Unified Wireless Network Software Release 8.10.x or later ● Cisco IOS ® XE Software Release 16.12.1 with AP Device Pack, or later |
| Supported wireless LAN controllers | ● Cisco Catalyst 9800 Series Wireless Controllers ● Cisco 3504, 5520, and 8540 Wireless Controllers and Cisco Virtual Wireless Controller |
| 802.11n version 2.0 (and related) capabilities | ● 4x4 MIMO with four spatial streams ● Maximal Ratio Combining (MRC) ● 802.11n and 802.11a/g ● 20- and 40-MHz channels ● PHY data rates up to 1.72 Gbps (40 MHz with 5 GHz and 20 MHz with 2.4 GHz) ● Packet aggregation: Aggregate MAC Protocol Data Unit (A-MPDU) (transmit and receive), Aggregate MAC Service Data Unit (A-MSDU) (transmit and receive) ● 802.11 Dynamic Frequency Selection (DFS) ● Cyclic Shift Diversity (CSD) support |
| 802.11ac | ● 8x8 downlink MU-MIMO with eight spatial streams ● MRC ● 802.11ac beamforming ● 20-, 40-, 80-, and 160-MHz channels ● PHY data rates up to 4.8 Gbps (160 MHz with 5 GHz) ● Packet aggregation: A-MPDU (transmit and receive), A-MSDU (transmit and receive) ● 802.11 DFS ● CSD support |
| 802.11ax | ● 8x8 uplink/downlink MU-MIMO with eight spatial streams ● Uplink/downlink OFDMA ● TWT ● BSS coloring ● MRC ● 802.11ax beamforming ● 20-, 40-, 80-, and 160-MHz channels ● PHY data rates up to 5.38 Gbps (160 MHz with 5 GHz and 20 MHz with 2.4 GHz) ● Packet aggregation: A-MPDU (transmit and receive), A-MSDU (transmit and receive) ● 802.11 DFS ● CSD support |
| External antenna with Smart antenna connector | ● The Cisco Catalyst 9130AXE Access Points are certified for use with antenna gains up to 13 dBi (2.4 GHz and 5 GHz) ● Cisco offers the industry's broadest selection of antennas, delivering optimal coverage for a variety of deployment scenarios ● Supports Self-Identifiable Antennas (SIA) on the Smart antenna connector ● Smart antenna connector is a compact multi-RF connector with 8-DART interface ● Requires the AIR-CAB002-DART-R= 2-fppt smart antenna connector when used with antennas with a RP-TNC connector ● Requires the AIR-CAB002-D8-N= 2 ft smart antenna connector when used with AIR-ANT2513P4M-N= antenna |
| Interfaces | ● 1x 100, 1000, 2500, 5000 Multigigabit Ethernet (RJ-45) – IEEE 802.3az ● Management console port (RJ-45) ● USB 2.0 at 4.5W (enabled via future software) |
| Indicators | ● Status LED indicates boot loader status, association status, operating status, boot loader warnings, and boot loader errors |
| Dimensions (W x L x H) | ● 9.17 x 9.17 x 1.58 in. (23.3 x 23.3 x 4.0 cm) |
| Weight | ● 3.78 lb. (1.71 kg) |
| Input power requirements | ● 802.3at Power over Ethernet Plus (PoE+), Cisco Universal PoE (Cisco UPOE ®) ● Cisco power injector, AIR-PWRINJ6= ● 802.3af PoE ● Cisco power injector, AIR-PWRINJ5= (Note: This injector supports only 802.3af) |
| Environmental | ● Nonoperating (storage) temperature: -22° to 158°F (-30° to 70°C) ● Nonoperating (storage) altitude test: 25˚C, 15,000 ft (4600 m) ● Operating temperature: -4° to 122°F (-20° to 50°C) ● Operating humidity: 10% to 90% (noncondensing) ● Operating altitude test: 40˚C, 9843 ft.(3000 m) |
| System memory | ● 2048 MB DRAM ● 1024 MB flash |